Current position:

Six-channel electrocardiograph EM-601



EM-601 Digital Electrocardiograph


1. Leads: 12 leads synchronous acquisition, 6 leads synchronous printing
2. Input mode: anti-defibrillation protection input
3. USB SLAVE interface, can be connected to ECG workstation software
4. Display: 800 * 480 pixels 7-inch LED backlit TFT LCD, the screen can display 1mm grid lines
5. Input device: T9 keyboard input
6. Language: Simplified Chinese, English, Pinyin input method and Wubi input method
7. USB MASTER interface, can be connected to USB printers that support PCL6 language, and print ECG with ordinary A4 paper
8, xml, bmp, pdf, jpg multiple file format preservation
9. Input loop current: ≤0.05uA
10. Input impedance: ≥50MΩ
11. Calibration voltage: 1mV ± 5%
16. Frequency response: 0.05 ~ 150Hz
17. Noise level: ≤15uVp-p
18. Time constant: ≥3.2s
19. Acquisition rate: normal 1000sps / channel, pacing 10000sps / channel
20. A / D conversion: 12 digits
21. Temperature drift: ≤0.5mm / ℃ in the temperature range of 5-40 ℃
22. Filtering: EMG filter 25Hz / 30Hz / 40Hz
AC filter: 50Hz / 60Hz
Baseline filtering: 0.05Hz / 0.15Hz / 0.25Hz // 0.32Hz / 0.5Hz / 0.67Hz / ADS
Low-pass filter: 75Hz / 100Hz / 150Hz
23. Electrocardiogram automatic diagnosis function, providing heart rate, PR interval, QRS complex time limit, QT interval, Q-Tc, P axis, QRS axis, T axis, R (V5) amplitude, S (V1) amplitude , R (V5) + S (V1) amplitude and other measurement parameters and automatic diagnosis conclusion
24. Recording method: with automatic recording, manual recording and rhythm recording
25. Retrospective record: the ECG waveform measured in the first 10 seconds can be recorded
26. The screen supports sleep power saving function
27. Paper speed: 5, 6.25, 10, 12.5, 25, 50 mm / s ± 5%
28. Recording mode: automatic 3ch × 4, 3ch × 4 + 1, 3ch × 4 + 3, 6ch × 2, 6ch × 2 + 1
29. Recording paper: 110mm roll paper
30. Storage: Built-in 4G SD card can store more than 10,000 sets of ECG data
31. Interface type: USB master interface × 1, USB slave interface × 1, SD card interface × 1, LAN port × 1, equipotential terminal interface × 1, lead wire interface × 1
32. Power requirements: AC: 100-240V 50Hz, DC: built-in rechargeable lithium battery and charger
33. DC working time: large capacity battery can continuously print 1080 ECG reports



咨询电话:

400-6018-657

在线留言

online message

XML 地图 | Sitemap 地图